Author Topic: meter readings  (Read 762 times)

0 Members and 1 Guest are viewing this topic.

skyking01

  • Newbie
  • *
  • Posts: 19
meter readings
« on: June 05, 2006, 07:22:31 AM »
Thank you everyone for the comments. Our average wind speed here in the Philippines is 3 to 7 mph and this turbine generate electricity in the slightest wind. It start at around 5 mph and at 8.2 mph it reads already 11 amps and at 15.5 mph wind it generates 35 amps. I've seen 50 amperes at 20 mph and 62 amperes at 23 mph wind. This reading was taken with my Fluke digital clamp meter since my panel meter reads up to 50 amps DC only. All these readings were taken with a 400 watts load on the inverter.

I am located in Iloilo City, Western Visayas and my place is near the airport. The tower

has a beacon light on top for warning system and this is 12 volts powered.


 

« Last Edit: June 05, 2006, 07:22:31 AM by (unknown) »

jmk

  • Hero Member
  • *****
  • Posts: 603
Re: meter readings
« Reply #1 on: June 05, 2006, 06:39:18 AM »
 What type of wind turbine are you useing, and what is the diameter?
« Last Edit: June 05, 2006, 06:39:18 AM by jmk »

skyking01

  • Newbie
  • *
  • Posts: 19
Re: meter readings
« Reply #2 on: June 05, 2006, 10:31:45 PM »
jmk,


I am using a 10 ft wind turbine, 9 coils and 24 magnets. This is a dual rotor design.

Pictures of it are posted in my diaries.


skyking01

« Last Edit: June 05, 2006, 10:31:45 PM by skyking01 »