Zubbly, I have been busy cleaning up my basement which flooded, so the wind generator was on hold. Today I spent sometime on the generator and was able to find the "Y" connection and traced which wires were 7,8,and 9. The connection seems to be a crimp connection and not soldered. The wire is copper colored but appears to be aluminum after scraping away the outer coating. The coil spans appear to be the 8-10-12 set up. To add the addittional leads can I use crimp connectors with heat shrink tubing over it? Do the addittional leads need to be aluminum wire? Do I need to re-lace and re-varnish the wires?
Thank you,
Otto
